Contact Us

Tel: +86-510-88100289

Fax: +86-510-88102325

Mob: +86-15370222672

E-mail: grandy@wxshuhang.com

Add: Xinming Industrial Area, Xibei Town, Xishan District, Wuxi, Jiangsu, China

LW 350 Series Pusher Solid Liquid Suspension Separation Centrifuge Machine For Sludge Dewatering

Our company's production of decanter centrifuge LW300, LW350, LW400, LW450, LW500, LW530, LW650, LW760, LW900 and other nine series of 17 kinds of specifications, In the rotor structure is divided into parallel, countercurrent, composite spiral, two-way extrusion and other forms, in the use of concentrated, dehydrated, graded, concentrated dehydration and other models, it can be widely applied to chemical, light industry, Food, environmental protection and other industries.

Inquiry

  • Product Details

Product Information
Model NO.: LW 350 Series
Object: Sludge Dewatering
Operating Type: Continuous Type
Centrifuge Type: Solid Liquid Suspension Separation Centrifuge
Application: Solid Liquid Separation
Trademark: SHUHANG
Certification: CE, ISO
Type: Decanter Centrifuge
Separation Mode: Horizontal Decanter Centrifuge
Installation: Horizontal
Condition: New
Machine Control: Frequency Inverter Optional
Transport Package: Wooden Case
Origin: Wuxi, Jiangsu, China


Product Description

LW 350 Series Pusher Solid Liquid Suspension Separation Centrifuge Machine For Sludge Dewatering

Horizontal screw unloading decanter centrifuge(referred to as the horizontal screw decanter centrifuge) is the use of centrifugal sedimentation separation of the suspension of the equipment. For the solid particles equivalent diameter = 3um, weight concentration ratio = 10% or cascade concentration ratio = 70%, the liquid specific gravity difference = 0.05g/cm3 of the various suspensions are suitable for the use of such centrifuges for liquid-solid separation or particles graded.
Our company's production of decanter centrifuge LW300, LW350, LW400, LW450, LW500, LW530, LW650, LW760, LW900 and other nine series of 17 kinds of specifications, In the rotor structure is divided into parallel, countercurrent, composite spiral, two-way extrusion and other forms, in the use of concentrated, dehydrated, graded, concentrated dehydration and other models, it can be widely applied to chemical, light industry, Food, environmental protection and other industries.


Technical Parameters

Model

LW350×1250

LW350×1500

Drum diameter

350mm

350mm

Drum length

1250mm

1500mm

Aspect ratio

3.5:1

4.28:1

Maximum speed

≤4000

≤4000

Separation factor

≤3126

≤3126

Single throughput

3-8m3/h

3-8m3/h

weight

2000kg

2000kg

Motor Power

18.5kw

18.5kw

Dimensions

3210×1000×1280(mm)

3460×1000×1280(mm)


Basic Principles
The solid drum is internally installed with a concentric discharge screw As they rotate in the same direction at a high speed, They have a certain rotational speed difference, which is caused by the driving system and the differential case Suspension enters the internal of the charge screw through the speed pipe and then goes into the drum after being accele rated Under the centrifugal force, solid particles of big density settle on the inwall of the drun, and form a circular layer of cake, which is continuously pushed by the discharge screw to the small end of the drum 8nd then out of it, while the set: led liquid is continuously discharge out of the drum from the vortex finder of the big end of the drum, hence solid-liquid separation of suspension.
For the solid liquid separation centrifuge, the continuous feeding separating and discharging can be realized as it rotates at its full speed. It is characterized by compact structure easy obstruction smith running, low noises, large handing capacity, low energy consumption, high automation small working strength, simple operation and easy maintenance and wide application.


Application Areas
The solid-liquid separation centrifuge is suitable for solid-phase dewatering, liquid-phase clarification and separation, liquid-liquid-solid three phase separation and size-grading of various suspensions with solid-phase particle sizes of 0.005-15mm, consistency of 1-40% and temperature of ≤ 100ºC, esp. for separating the suspensions whose consistency and particle size vary greatly and for which recovery of filter cloth is difficult, such as treatment of PVC resins, ammonium sulfite, barrium carbonate, strontium sulphate, lithopone, starch, diatomite, plaster, bauxite, soybean protein, peanut protein, fruit juice, drinks, vegetable oil, citric acid, powder of blood, powder of titanium white, kaolin clay and drilling mud, etc., and dewatering of washed coal and fine coal, purification of waste oil, treatment of grain stillage liquid waste and municipal sewage and mineral classification. Besides, it is suitable for waste water treatment of electric power plant sludge, printing and dyeing sludge, paper manufacture sludge.


Product Images

Solid - liquid centrifuge.jpg

We look forward to cooperating with partners from all the world to build win-win cooperation relationship in long term. If you are interested in our products,please contact us!
WUXI SHUHANG MACHINERY SCIENCE AND TECHNOLOGY CO.,LTD.
Add: Xinming Industrial Area ,Xibei Town,Xishan District,Wuxi,Jiangsu,China
Contact: Ge Beizhi
Tel: +86-510-88100289
Fax: +86-510-88102325
Mob: +86-15061527476
E-mail:grandy@wxshuhang.com
Website:http://www.shuhangmachinery.com

If you are interested the LW 350 Series Pusher Solid Liquid Suspension Separation Centrifuge Machine For Sludge Dewatering, welcome to contact our factory for more details. We are one of the leading China manufacturers and suppliers equipped with a productive factory at your service. The quality products made in China and good customized service with competitive price can be assured.

Related Products
  • Feedback