Contact Us

Tel: +86-510-88100289

Fax: +86-510-88102325

Mob: +86-15370222672

E-mail: grandy@wxshuhang.com

Add: Xinming Industrial Area, Xibei Town, Xishan District, Wuxi, Jiangsu, China

LWS575 Series Industrial Continuous 3 Phase Horizontal Screw Decanter Centrifuges

LWS575 Series Industrial Continuous 3 Phase Horizontal Screw Decanter Centrifuges

LWS575 series centrifuge is my company in the years on the basis of the application, combined with the current international advanced technology development of three-phase separation centrifuge, for liquid - liquid - solid material separation, with a simple structure, easy operation, etc., can easily To achieve three-phase separation, the scope of application, strong adaptability.

Inquiry

  • Product Details

Product Information
Model NO.: LWS575 Series 3 Phase Decanter Centrifuges
Operating Type: Continuous Type
Centrifuge Type: Horizontal Screw Centrifuges
Separation Mode: Sedimentation Type
Installation: Horizontal
Condition: New
Specification: LWS575 Series
Type: Three-phase Horizontal Centrifuge
Trademark: SHUHANG
Origin: Wuxi, China
Applications: Coal Tar, Fish Meal, Fish Oil, Wheat Starch, Gluten, Oil Sludge, Kitchen Rubbish


Product Description

LWS575 Series Industrial Continuous 3 Phase Horizontal Screw Decanter Centrifuges

LWS575 series centrifuge is my company in the years on the basis of the application, combined with the current international advanced technology development of three-phase separation centrifuge, for liquid - liquid - solid material separation, with a simple structure, easy operation, etc., can easily To achieve three-phase separation, the scope of application, strong adaptability.
Double cone horizontal screw centrifuge is used in the ordinary three-phase decanter centrifuge structure to add a cone and diversion device, the use of this double cone and special diversion structure to meet the separation of various materials, especially the soft residue separation, We through the different materials of the experiment and the use of the conclusion that the special structure of the machine has a strong adaptability, high separation coefficient, fully compatible with foreign double-decker decanter centrifuge. In addition, you can also configure the automatic torque and fine-tuning differential control, temperature detection, vibration detection, from the technical to ensure that the centrifuge safe, normal and efficient operation.

The Main Technical Parameters

ModelDrum diameter x length(mm)Drum maximum speed(r/min)Common working speed(r/min)Highest separation factor(Fτ)Processing capacity(m3/h)Motor Power(kw)Total Weight (kg)Dimensions(mm)
LWS575×2300575 ×230028002600-2800250010-303050005100x2000 x1500
Note1. Suspension processing capacity and slagging capacity, depending on the specific materials and separation requirements.
2. Contact with the material part of the material: 304, other specific materials, please specify when ordering.
3. Under the premise of satisfying the separation requirements, try to use the lower limit of the commonly used working speed.

3 phase decanter centrifuges.jpg


Working Principle

Double cone three-phase centrifuge is mainly composed of differential gear, screw, drum, shell, frame, lubrication system and motor whose operating principle is that suspension enters into drum through feed pipe and screw outlet and solid particles with bigger density will deposit on the inner wall of the drum due to the centrifugal force generated by high-speed rotation and be scraped off and pushed out the discharge port by screw blade doing relative motion with drum. Liquid with different density will form two liquid rings and flows out through two different outlets on the big end cover.
The relative motion between screw and drum is generated by deferential gear whose shell is connected with drum and output shaft is connected with screw. Main motor drives the drum rotating while auxiliary motor drives the rotation of input shaft of differential gear whose output shaft transfer torsion to screw according to certain speed ratio to realize the continuous material separation proceeded by centrifuge.


Structural Features
1. Wide range of applications: for chemical, light industry, food, environmental protection and other industries in the solid - liquid - liquid three - phase separation. Such as: separation of oil and water in vegetable oil, oil in oil meal, hydrolytic protein, separation of slag, separation of oil and water slag in oil field;
2. High degree of automation: the machine's feed, separation, discharge and other processes are running at full speed in the case of continuous automatic completion;
3. Differential speed adjustable: The machine uses dual frequency control, can be in a certain range of differential speed to adjust to get the best results;
4. Clean and pollution-free: the separation of the material on the machine is completely closed in the case of the scene without pollution, to ensure the production environment of clean.
5. Good operating stability: The machine uses cycloid wheel differential, reliable performance, low operating temperature.
6. Corrosion resistance: The centrifuge and material contact part of the material are all stainless steel, a strong corrosion resistance.
7. Simple operation, accurate adjustment: The machine uses the current international advanced technology, light-phase baffle and heavy-duty baffle to adjust the replacement without opening the drum to adjust the replacement. Baffle adjustment is accurate, the location will not change, the adjustment is simple, easy to operate.


Our Advantages
1, All machine parts touch with materials are stainless steel (SUS304) made, to ensure the machine corrosion-resistant and durable.
2,Screw blade is tungsten carbide treated, with excellent wear resistance
3,The screw blade is hollow designed, so that the solid phase is less disturbed by the flowing of liquid phase. This way, can enhance the dryness of the solid output, and enhance the working-efficiency.
4,The solid discharge port is made of ceramic. It’s durable with long life.
5,Double Motors and double frequency changers. The differential speed is adjustable.
6,Select the planetary gear differential with heavy load and large drive radio.
7,Thin oil lubrication system is available for high speed and continuous operating.
We designed the oil tank in the mainframe, the whole machine structure is more compact.
8,Anti-explosion type centrifuges are available for inflammable and explosive separating site. 


About Our Company

Wuxi Shuhang Machinery Science& Technology Co.,Ltd founded in 2005, focused on manufacturing sludge dewatering machine, decanter centrifuge machine, filter cartridge making machine etc.  
The workshop covers an area of more than 10,000 square meters. There are advanced processing equipment and testing equipment such as CNC lathe equipment, machining center, high-speed dynamic balance machine, trilinear coordinates measuring instrument etc. Equipment more than 50 sets in total.  10 years manufacturing experience.


We look forward to cooperating with partners from all the world to build win-win cooperation relationship in long term. If you are interested in our products,please contact us!
WUXI SHUHANG MACHINERY SCIENCE AND TECHNOLOGY CO.,LTD.
Add: Xinming Industrial Area ,Xibei Town,Xishan District,Wuxi,Jiangsu,China
Contact: Ge Beizhi
Tel: +86-510-88100289
Fax: +86-510-88102325
Mob: +86-15061527476
E-mail:grandy@wxshuhang.com
Website:http://www.shuhangmachinery.com

If you are interested the lws575 series industrial continuous 3 phase horizontal screw decanter centrifuges, welcome to contact our factory for more details. We are one of the leading China manufacturers and suppliers equipped with a productive factory at your service. The quality products made in China and good customized service with competitive price can be assured.
Related Products
  • Feedback