Contact Us

Tel: +86-510-88100289

Fax: +86-510-88102325

Mob: +86-15370222672

E-mail: grandy@wxshuhang.com

Add: Xinming Industrial Area, Xibei Town, Xishan District, Wuxi, Jiangsu, China

Home > Exhibition > Content
Brief description of the manufacturing process in PP melt blown filter cartridge production line Jul 03, 2017

PP melt blown filter cartridge production line produced by the PP melt blown filter cartridge, in terms of its structure, in fact, is the outer fiber thick and its inner fiber fine, followed by, in fact, we should pay attention to it in the outer layer is relatively loose, On its inner layer of the gradual gradient, in fact, is gradually tight structure. For PP melt blown filter cartridge production machine in the processing time, in fact, it should be noted that these features.

PP melt blown filter cartridge production line in the use of melt-blown process, in fact, it will squeeze the polymer into a non-woven process, it will originate in the early 1950s, in terms of this aspect, We actually have to pay attention to it in fact is to start directly to develop a filter with ultrafine effect on the filter material.

PP melt blown filter cartridge production line to work on the time, we actually have to pay attention to the thermoplastic (high temperature melting, low temperature curing) polymer slices of raw materials, in fact, it can be directly used for melt-blown filter on the production process The

PP melt blown filter cartridge production machine in the operation of the time, we can actually find that, in terms of polypropylene, it is actually the most widely used meltblown process of a slice of raw materials, in addition to the melt-blown process comparison Commonly used polymer chips raw materials, in fact, there will be polyester, polyamide and its polyethylene, PTFE and a series of raw materials. Moreover, in terms of another aspect, we actually have to pay attention to its olefinic raw materials, in general, is not required to dry.

PP melt blown filter cartridge production line produced by the PP melt-blown filter, in the actual application, we actually found that its structural characteristics is actually relatively small fiber fineness, under normal circumstances, that is less than 10 Micron, in terms of most of its fiber fineness, in fact, it will be between 1 to 4 microns, be very fine.

PP melt blown filter cartridge machine.jpg

We look forward to cooperating with partners from all the world to build win-win cooperation relationship in long term. If you are interested in our products,please contact us!

WUXI SHUHANG MACHINERY SCIENCE AND TECHNOLOGY CO.,LTD.

Contact: Ge Beizhi

Tel: +86-510-88100289

Fax: +86-510-88102325

Mob: +86-15061527476

E-mail:grandy@wxshuhang.com

Website:http://www.shuhangmachinery.com