Contact Us

Tel: +86-510-88100289

Fax: +86-510-88102325

Mob: +86-15370222672

E-mail: grandy@wxshuhang.com

Add: Xinming Industrial Area, Xibei Town, Xishan District, Wuxi, Jiangsu, China

Home > Exhibition > Content
The performance characteristics of the CTO activated carbon filter cartridge equipment Nov 30, 2017

In order to ensure the work performance of the CTO activated carbon filter cartridge equipment, especially the advanced automatic control system is the used, which not only realizes the rapid production and operation, but also greatly improves the quality of the product. The CTO activated carbon filter cartridge equipment uses the active carbon to add adhesive, such as PE resin for heating extrusion of a single molding.

 

For the user, under normal circumstances, the CTO activated carbon filter cartridge equipment and its production line can carry out different new work for 24 hours a day. Its rated power is 16. 45kw / set, and the actual power is usually 8kw/h when the machine is powered on. At present, it mainly uses the activated carbon and PE glue as raw materials for the production and processing of filter products. The length of the filter element is 5 inches, 10 inches, 20 inches, 30 inches and so on. The remaining dimensions can be customized.

 

Because of its stable performance and automation control, the yield of the CTO activated carbon filter cartridge equipment is relatively high. If the cooling system uses direct cooling carbon rods, its output can be up to 300 to 400 mm per minute. If the cooling system cools the extruding machine die directly, the output can be up to 150 to 200 mm per minute. The internal diameter range is 9mm - 100mm, and the external diameter range is 29 mm - 150 mm.

 

It should be noted that during the operation of the CTO activated carbon filter cartridge equipment, the extruding machine can only achieve one internal diameter at a time, such as 30 mm internal diameter and 63 mm external diameter. If other dimensions are required, the extruding machine dies need to be replaced. The activated carbon filter can be combined with adsorption, filtration, interception and catalysis, and can effectively remove the organics and other radioactive substances in the water.

 

In short, the CTO activated carbon filter cartridge equipment has good work performance in the practical application. Its output is more stable, the output is high and the power consumption is low. With a special cooling design, the cooling rate can be guaranteed and the product quality can be improved.

 

http://www.shuhangmachinery.com/